Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the old panes. In this case you'll need locate some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a great idea seal the gap after the glass is removed. This will stop drafts and water from getting into your property until a professional arrives to repair the window repair near me. This also serves as an obstacle to stop intruders from getting into your home. If the gap between the window and the door is large, you might prefer an alarm system that includes a window. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window that is sagging. To do this, you'll have to open the window so that you can access the frame. After that, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in place.

If you are unable to reposition the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to lose their tightness. It is important to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it could also be due to the handle mechanism wearing out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close your window and do an initial test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

It is crucial to take action if awake each day to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, the old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes have no debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in damp conditions and can quickly spread across the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with ease, it may be hinges that are at the fault. These are easily repaired by any skilled DIYer and can be completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It is very easy to change the hinges on a window, but it's easier if someone else helps you hold the frame.

Check that the uPVC hinges open and close in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused either by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to give assistance.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window repair (https://www.dermandar.com/user/candate28).

5. Draughts

Draughts can be caused by several different causes. First, the hinges because of wear and tear, may become displaced, which causes an opening to appear where the sash joins the frame. They can be repaired by giving them a thorough clean, however when they're beyond repair, it could be necessary to have them re-aligned or replaced. The interlock may be misaligned. This is located on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace them.

The second most frequent reason for draughts are the window seals. They are prone to wear or damaged over time and let air escape through these gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and lessen the possibility of draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will help keep cold air out and keep your home warm and cosy!

The windows made of upvc can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to realize that all windows have a life span and there may come a point where it is more economical to replace them than repair them. If you have any problems with your window made of upvc you should consult a professional as soon as possible.