Window Repairs

Window repairs can help homeowners save money and make their homes comfortable. Window replacement may be necessary in the event of serious damage, such as broken glass or a window frame that has been smashed.

Other issues are fixable to extend the longevity of windows. The most frequent issues are:

Cracked or broken Panes

It's a rock that's been being tossed by your lawnmowers, or a tree's branch blown by high winds, damaged window glass isn't just visually unappealing, but also can result in higher electricity bills as the broken pieces allow cold air into your home. Fortunately, it's generally simple to repair windows with damaged panes.

Begin by carefully removing the glass with gloves and safety glasses. You may need to use an utility knife to remove old glazing compound or putty around the frame's edges. Then, use a soft cloth or paper towel to wipe the surface of both the glass and the frame's wood.

Once the frame is clean, apply a waterproof silicone caulking on the perimeter of the frame. This will stop water from leaking into the frame through the cracks and cause further damage.

A bad crack in double-paned glass may cause gas to leak between the panes, making your windows less efficient in insulating. If the crack is significant enough to threaten the integrity of the glass, or in the case of an inner pane that's totally missing, it might be the time to call a professional.

Cracks in the glass caused by thermal stress may occur when there is an extreme temperature difference between your home and the outside. This causes the glass to expand and contract. If the cracks are located on two sides of a window repair near me, it is recommended to replace it instead of attempt to repair it.

Clear tape can be used to close cracks in windows that are not yet ready for replacement. It will also keep out bugs and cold wind. You can even cut an area of nylon stocking or tarp that's large enough to cover the crack and fix it with duct tape. This is not an indefinite solution, but it's a good way to keep cold air out and insects away from your home. If you notice cracks appearing on your older windows You should consult the local company to determine if replacing the whole window is a better option.

Rotten Wood

Wood rot is a typical problem for windows. It can damage a home's appearance and pose a safety risk. However, it is possible to repair rotted wood. First, you need to ensure that the root of the rot has been taken care of. Check for roof leaks and other areas where water could get into the wood.

Next, you will need to remove any rotten areas of the window frame. This can be done with an axe, a claw hammer, or rasp. After removing the rotten wood, you'll need to replace it with new wood. It is recommended that you make use of pre-treated wood for this project since it is more resistant to rot. If you are unable to replace the wood that has been damaged, you can try using filler or wood hardener to strengthen the damaged area. The majority of hardware stores have this type of product. Follow the instructions on the label of the product to get the most effective results.

After you have repaired the damaged areas of the window sill, it's essential to safeguard the area. Apply a water-resistant sealant on the wood. A product such as Sikkens is an excellent option for this job.

It is also possible to use a two-part epoxy filler to protect the wood from further damage. This product is easy to apply and leaves a beautiful finish. However, it is important that you adhere to the instructions for application on the label. After the epoxy filler dries it is possible to sand the wood's surface. Start with a rough sandpaper and then move on to an easier grade.

The most important thing you don't want to do is to make the rotted area even worse by expose it to more water. Therefore, it is recommended to cover the area that has been repaired with an oil-based primer which will help protect it from moisture. After that, you can apply waterproof wood sealant.

The W won't open

There are many reasons a Window repair won't open. The house may have settled, or the wood frames could have warped during wet weather. Someone might have also nailed them shut for security. However, with a bit of patience and the right tools, many windows that are stuck can be opened.

Gunk or debris that has accumulated can be a major cause of the window not opening. Acme Glass notes that dirt and grime accumulates over time on hinges, sliding tracks, and locks. Additionally, hardware made of metal may get rusty when in contact with humidity and direct sunlight. Spraying grease on these areas can aid in preventing oxidation and ensure that your windows are operating properly.

The pulleys used to raise or lower the window may become loose, or break. These components may lose tension and cause obstruction especially if the window is located two or more stories above the ground.

If you are having trouble opening the window Try using a pry bar to gently force the window to open just a little at a time. Put a piece of wood on the frame to give your pry bar more leverage and be careful not to scratch the window or the wood. Try using a hairdryer to dry the frame's edges for several minutes. This will warm the wood and make it easier to move.

A damaged spring can be the cause of a window that won't lift or lower. Depending on the manufacturer of your windows, you will be required to refer to your owner's manual for further instructions.

If you've tried cleaning and lubricating the moving parts on your windows, but they still aren't opening, it's probably time to replace the windows. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let your windows slide from functional to unusable, as windows that aren't properly shut could leave your home vulnerable to water damage and burglary. Contact us today to learn more about our replacement windows and our services!