Locked Keys in Car? Here's how to open a car door without key to open a car Your Car Without Damage

Don't be worried if you've locked your keys in your vehicle. There are many ways to get around it before calling a locksmith or a roadside assistance service.

For instance, you can make use of a shoelace with a slip knot to secure the post lock, or a coat hanger made of wire that you untwist and shape into a hook. You can also make use of a door wedge or an inflatable wedge.

Pump Wedge

If you've found yourself in a car that is locked and none of the DIY options such as wire hangers, shoestrings or wedges are working for you, it's time to contact an expert. A locksmith or repo service provider could have specialized tools for unlocking that will allow you to open your car without damaging it.

If they do, be sure you use them in a proper manner. Be aware of where to insert the wedge tool. Many people put the wedge on the top corner of the door, which is where it is most vulnerable to being damaged. This is a mistake as you're more likely to harm the weather stripping or the wires inside the door. Put the wedge in the area where you can see the largest gap and where the maximum leverage is.

The Pump Wedge is an inflatable wedge constructed of high-quality vinyl that doesn't damage the surface. It slides between the door of the vehicle and the door frame, and is pumped up to create a separation which allows you to insert other tools, such as a long reach car opening tool rod. It has a hook on one end that you could shape in order to grab the latch on the door handle.

A less expensive version of this is a pair of wooden door stops. They can be put on the rear of the door to pry the space wide enough to accommodate rods. You can also use a slim Jim, a thin strip of metal that is bent into a hook and used to latch onto the lock. This method is not for the faint-hearted as you must be sure not to damage the weather stripping that is on your door.

Another alternative is to use a shoelace, but this only works with older vehicles that do not have a push-button unlocking mechanism. You can tie a slip knot through the middle of the lace and then move it upwards and downwards through the door's seam until it reaches the latch. Then, move the lace until it is in contact with the lock, tighten the slip knot and pull it upwards. This method is more difficult and could scratch the paint on the door or scratch the trim if you are not careful.

Inflatable Wedge

If you own a wedge-shaped inflatable car door opener, you'll be able to open your vehicle without the necessity of prying or slim jim tools. These wedges can be put between the window and frame of the car. They will when they are inflated, they create a large opening to place a tool that has a long reach like a button grabper or slim jim. This method is safer than using a screwdriver and is a viable option even if you don't have access to an screwdriver.

A coat hanger that is wired into a hook is another method to unlock cars without causing damage to the exterior or interior. It can be used to grasp the lock and may work better than the flat screwdriver as it is less likely to cause damage to the paint of the vehicle. However, you must inspect all the doors to make sure there is no other way to gain entry.

You can also try an old plastic bag that has been bent into a v-shaped or noose-like shape, but you'll have to be careful not to tear it, since it could make your situation even more complicated. This technique is especially effective if you are unable to find the button to lock it. It might not be as reliable as using a wedge or a metal coat hanger, but it can help when you're in an awkward situation.

Be at peace and always put safety first. There are a variety of solutions to this issue. If you read this article, you'll be prepared for any situation that may arise. By following the steps we've provided, you will be able to unlock your car and get going without causing unnecessary stress or damage. And of course, if you are able, make certain to have your keys when you leave your vehicle.

Shoelace

Being locked out of your vehicle is one of those "oh crap" moments that can make your day miserable. It's a great idea to have a few things that you can use to open your car without breaking any windows. These items are readily available and can help you save money on locksmiths, or the time required to call roadside assistance.

A shoelace or twine can be used to unlock a vehicle. It is simple to use and is compatible with numerous vehicles. This method only works on cars with post locks. They can be stacked vertically on the sill of the window and are easily accessible from outside the car. To get the job done you need to use a shoelace to make a slip knot and wiggle it into the crack between the frame of the window and the door. Once the slip knot has been set, pull both ends of the string upwards how to open a car door without a key loosen the lock.

This method may only work on older models that have an open lock with a hook. If you have a screwdriver handy to use, you can use it to open the door more aggressively. Another option is to grab the pole from a nearby object, such as a doorframe or piece of wood, and place it into the window frame to create an opening for the rod you'll use to push the lock's interior button.

While the methods mentioned above may be somewhat safe for some drivers, it's best to seek help if you can. This will prevent any additional damage to your vehicle, and it will also reduce the chance of an accident caused by the stress of the situation. If you don't have a mobile phone or are unable to call for help it is essential to notify trusted family members and acquaintances know where the vehicle is parked. A spare set of keys must be kept in a safe location on your vehicle.

Wire Hanger

There is no doubt that locking your keys in your car can be a traumatic experience. But, the most important thing is to remain calm and think through what options you have to retrieve them. You will not make the situation worse if you do not get caught up in panic.

One of the most effective ways to do this is to utilize a modified coat hanger to get back in your vehicle. You will need to uncoil the coat hanger to ensure that it has a straight slant and a hook that you can use to move the lock rod inside of your door. Once you are able to reach the rod of your lock you should be in a position to pull it upwards to let the door open.

You could also use rods, or metal pieces from your car. It is important to ensure that you don't damage the vehicle during this process. It is recommended to avoid having to disassemble the car. This method will work better on older vehicles than newer models. However, it can be used on cars with unique outer door handles.

You can also use a shoestring and a slip knot to accomplish a similar trick. This can also be done on a post lock however it is slightly more difficult to use because you'll depend on the tension of the string to grab the lock. The best method for doing this is by threading the shoestring through a tiny hole that you can create in the weatherstripping on the door of your vehicle. Once the string has been threaded, you can pull it in a tight manner to create a loop which will wrap around the lock and allow you to take it off. This method can be extremely effective if you are lucky enough to locate the lock in the correct spot.